Andis Pet Nail Grinder Replacement Pack

To remove a sanding drum: depress collet release button while turning collet nut counter-clockwise using wrench provided until loose. Remove sanding drum.

To insert a new sanding drum: insert the sanding drum into the collet. Depress collet release button while turning collet nut clockwise until it locks into place. Using wrench provided, turn collet nut clockwise until sanding drum is tight. To replace a sanding band, loosen the screw (using the small screwdriver tip on the wrench provided) to contract the drum and slide the old band off. Slide the new sanding band on, and expand the drum by tightening the screw again.

IMPORTANT: Before each use, check that the drum is sufficiently expanded to secure the band during use. If band is loose during operation, it may be thrown from grinder and cause injury.